W32.Kergez.C@mm

SUMMARY

W32.Kergez.C@mm is a mass-mailing worm that sends itself to all the email addresses it finds in the following files:

• Files with the *.php, *.asp, *.htm* extensions.
• Files located in any of the directories specified in the registry key HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell Folders>
  

The email messages will have the following characteristics:

Subject: Re: New Security Vuln.
Attachment: Virus_Guard.exe

W32.Kergez.C@mm is written in Microsoft Visual C++ and is UPX-packed.

Protection

• Virus Definitions (LiveUpdate™ Weekly) August 13, 2003
• Virus Definitions (Intelligent Updater) August 7, 2003

TECHNICAL DETAILS

When W32.Kergez.C@mm runs, it may perform some of the following actions:

1. Copies itself to %Windir%Kangaroo.exe and %System%Internat67.exe.
   
   NOTES:
   • %Windir% is a variable. The worm locates the Windows installation folder (by default, this is C:Windows or C:Winnt) and copies itself to that location.
   • %System% is a variable. The worm locates the System folder and copies itself to that location. By default, this is C:WindowsSystem (Windows 95/98/Me), C:WinntSystem32 (Windows NT/2000), or C:WindowsSystem32 (Windows XP).
     
     
2. Adds the value:
   
   "Systray"="%Windir%Kangaroo.exe"
   
   to the registry key:
   
   HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun
   
   so that the worm runs when you start Windows.
   
   
3. Adds the value:
   
   "Kangaru"= <path to worm>
   
   to the registry key:
   
   HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRunServices
   
   
4. Drops a VBS script named Kanguru.vbs. This script creates a backdoor server named Kanguru.exe, and then executes it. When this file is run, it copies itself to %System%Security.scr and installs itself by adding the line:
   
   run=%system%Security.scr
   
   to the %Windir%Win.ini file.
   
   Note: These files are detected as Backdoor.Kergez.
   
   
5. Attempts to terminate the following processes:
   
   • AVXGUI.EXE
   • AVPUPD.EXE
   • AVGSCAN.EXE
   • AVG.EXE
   • AVGW.EXE
   • AVXSCH.EXE
   • MGUI.EXE
   • FP-WIN.EXE
   • REGEDIT.EXE
   • BLACKICE.EXE
   • F-PROT.EXE
   • PAVSCHED.EXE
   • NMAIN.EXE
   • NAVW32.EXE
   • AVPM.EXE
   • MSCONFIG.EXE
   • AVP32.EXE
   • ZONEALARM.EXE
   • NAVAPW32.EXE
   • Firewall
   • Alarm
   • Secure
   • F-Prot
   • Clean
   • Guard
   • Panda
   • McAfee
   • Anti
   • Kaspersky
   • Norton
   • Check
     
     
6. Sends itself to all the email addresses it finds in the following files:
   • Files with the *.php, *.asp, *.htm* extensions.
   • Files located in any of the directories specified in the registry key HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell Folders>
     

The email messages will have the following characteristics:

Subject:

Re: New Security Vuln.

Body:

Are you vulnerable to identity theft!
Protects against viruses, worms, Trojans & hackers.
Microsoft Software Update Services is designed to greatly simplify the process of keeping Windows-based systems up-to-date with the latest critical updates.
SUS enables administrators to quickly and reliably deploy critical updates to their Windows 2000-based servers and Windows 2003-based servers as well as desktop computers running Windows 2000 Professional or Windows XP Professional Online hackers know more than 2500 ways to break into naked unprotected PC systems.
Be safe, be smart!

Attachment: Virus_Guard.exe

Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

• Turn off and remove unneeded services. By default, many operating systems install auxiliary services that are not critical, such as an FTP server, telnet, and a Web server. These services are avenues of attack. If they are removed, blended threats have less avenues of attack and you have fewer services to maintain through patch updates.
• If a blended threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
• Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services (for example, all Windows-based computers should have the current Service Pack installed.). Additionally, please apply any security updates that are mentioned in this writeup, in trusted Security Bulletins, or on vendor Web sites.
• Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
• Configure your email server to block or remove email that contains file attachments that are commonly used to spread viruses, such as .vbs, .bat, .exe, .pif and .scr files.
• Isolate infected computers quickly to prevent further compromising your organization. Perform a forensic analysis and restore the computers using trusted media.
• Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.

REMOVAL

The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

1. Disable System Restore (Windows Me/XP).
2. Update the virus definitions.
3. Run a full system scan and delete all the files detected as W32.Kergez.C@mm.
4. Edit the Win.ini file (Windows 9x/Me).
5. Reverse changes made to the Registry.

For specific details on each of these steps, read the following instructions.

1. Disabling System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:

• "How to disable or enable Windows Me System Restore"
• "How to turn off or turn on Windows XP System Restore"

For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article, "Antivirus Tools Cannot Clean Infected Files in the _Restore Folder," Article ID: Q263455.

2. Updating the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:

• Running LiveUpdate, which is the easiest way to obtain virus definitions: These virus definitions are posted to the LiveUpdate servers once each week (usually on Wednesdays), unless there is a major virus outbreak. To determine whether definitions for this threat are available by LiveUpdate, refer to the Virus Definitions (LiveUpdate).
• Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted on U.S. business days (Monday through Friday). You should download the definitions from the Symantec Security Response Web site and manually install them. To determine whether definitions for this threat are available by the Intelligent Updater, refer to the Virus Definitions (Intelligent Updater).
  
  The Intelligent Updater virus definitions are available: Read "How to update virus definition files using the Intelligent Updater" for detailed instructions.

3. Scanning for and deleting the infected files

1. Start your Symantec antivirus program and make sure that it is configured to scan all the files.
   • For Norton AntiVirus consumer products: Read the document, "How to configure Norton AntiVirus to scan all files."
   • For Symantec AntiVirus Enterprise products: Read the document, "How to verify that a Symantec Corporate antivirus product is set to scan all files."
2. Run a full system scan.
3. If any files are detected as infected with W32.Kergez.C@mm, click Delete.
   

4. Editing the Win.ini file
If you are running Windows 95/98/Me, follow these steps:

1. The function you perform depends on your operating system:
   • Windows 95/98: Go to step II.
   • Windows Me: If you are running Windows Me, the Windows Me file-protection process may have made a backup copy of the Win.ini file that you need to edit. If this backup copy exists, it will be in the C:WindowsRecent folder. Symantec recommends that you delete this file before continuing with the steps in this section. To do this:
     1. Start Windows Explorer.
     2. Browse to and select the C:WindowsRecent folder.
     3. In the right pane, select the Win.ini file and delete it. The Win.ini file will be regenerated when you save your changes to it in step VI.
        
        
2. Click Start, and then click Run.
3. Type the following, and then click OK.
   
   edit c:windowswin.ini
   
   (The MS-DOS Editor opens.)
   
   NOTE: If Windows is installed in a different location, make the appropriate path substitution.
   
4. In the [windows] section of the file, look for a line similar to:
   
   run = %System%Security.scr
   
5. If this line exists, delete everything to the right of =
   
   When you are done, it should look like:
   
   run =
   
6. Click File, and then click Save.
7. Click File, and then click Exit.
   

5. Reversing the changes made to the registry

CAUTION: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified keys only. Read the document, "How to make a backup of the Windows registry," for instructions.

1. Click Start, and then click Run. (The Run dialog box appears.)
2. Type regedit
   
   Then click OK. (The Registry Editor opens.)
   
   
3. Navigate to the key:
   
   HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun
   
   
4. In the right pane, delete the value: Systray
   
   
5. Navigate to the key:
   
   HKEY_LOCAL_MACHINESoftwareMicrosoftWindows NTCurrentVersionRunServices
   
   
6. In the right pane, delete the value: Kanguru
   
   
7. Exit the Registry Editor.