Hacktool.Switchsniff

SUMMARY

Behavior

Hacktool.Switchsniff is a network sniffer that detects and intercepts packets on the network.

Symptoms

Your Symantec program detects Hacktool.Switchsniff.

Transmission

This security risk must be manually installed.

Protection

• Virus Definitions (LiveUpdate™ Daily) June 8, 2006
• Virus Definitions (LiveUpdate™ Weekly) June 14, 2006
• Virus Definitions (Intelligent Updater) June 8, 2006
• Virus Definitions (LiveUpdate™ Plus) June 8, 2006

TECHNICAL DETAILS

When Hacktool.Switchsniff is executed it performs the following actions:

1. Creates the following files:
   
   
   • %SystemDrive%Documents and SettingsAll UsersStart MenuProgramsSwitchSnifferReadme First.lnk
   • %SystemDrive%Documents and SettingsAll UsersStart MenuProgramsSwitchSnifferSwitchSniffer.lnk
   • %SystemDrive%Documents and SettingsAll UsersStart MenuProgramsSwitchSnifferUninstall SwitchSniffer.lnk
   • %ProgramFiles%NextSecurity.NETcountryflag.dll
   • %ProgramFiles%NextSecurity.NETip-to-country.csv
   • %ProgramFiles%NextSecurity.NET pf.sys
   • %ProgramFiles%NextSecurity.NETReadMe.txt
   • %ProgramFiles%NextSecurity.NETservices
   • %ProgramFiles%NextSecurity.NETSwitchSniffer.exe
   • %SystemDrive%ssniffer_excep.txt
     
     Note:
   • %SystemDrive% is a variable that refers to the drive on which Windows is installed. By default, this is drive C.
   • %ProgramFiles% is a variable that refers to the program files folder. By default, this is C:Program Files.
     
     
2. Creates the following files, that are part of a legitimate Winpcap library:
   
   
   • %System%packet.dll
   • %System%drivers pf.sys
   • %System%pthreadVC.dll
   • %System%WanPacket.dll
     
     Note: %System% is a variable that refers to the System folder. By default this is C:WindowsSystem (Windows 95/98/Me), C:WinntSystem32 (Windows NT/2000), or C:WindowsSystem32 (Windows XP).
     
     
3. Creates the following legitimate folders, related to InstallShield:
   
   
   • %CommonProgramFiles%InstallShield
   • %ProgramFiles%InstallShield Installation Information
     
     Note: %CommonProgramFiles% is a variable that refers to the Common Files folder. By default, this is C:Program FilesCommon Files.
     
     
4. Creates the following registry subkeys:
   
   HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall
   {B9AEF567-6DD3-4B30-BCC6-E88829BEDE98}
   HKEY_LOCAL_MACHINESOFTWARENextSecurity.NETSwitchSniffer
   HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorer
   MenuOrderStart MenuProgramsSwitchSniffer
   HKEY_CURRENT_USERSoftwareSwitchSniffer
   
   
5. Creates several other registry subkeys related to legitimate components, like Installshield, Winpcap and Asprotect.
   
   
6. Polls and collects all the network packets in a switched LAN.
   
   
7. Scans and displays all active and hidden hosts.
   
   
8. Identifies and prevents ARP spoofing attempts and can detect which computer in the network is performing an ARP spoof.
   
   
9. May perform several other network functions for filtering, routing, scanning, blocking, etc.
   
   
10. May be used in conjunction with a packet sniffer for detailed traffic logging and analysis.

REMOVAL

The following instructions pertain to all Symantec antivirus products that support security risk detection.

1. Update the definitions.
2. Run a full system scan.
3. Delete any values added to the registry.
   

For specific details on each of these steps, read the following instructions.

1. To update the definitions
To obtain the most recent definitions, start your Symantec program and run LiveUpdate.


2. To run the scan

1. Start your Symantec antivirus program, and then run a full system scan.
   
2. If any files are detected, and depending on which software version you are using, you may see one or more of the following options:
   
   Note: This applies only to versions of Norton AntiVirus that support security risk detection. If you are running a version of Symantec AntiVirus Corporate Edition that supports security risk detection, and security risk detection has been enabled, you will only see a message box that gives the results of the scan. If you have questions in this situation, contact your network administrator.
   
   • Exclude (Not recommended): If you click this button, it will set the risk so that it is no longer detectable. That is, the antivirus program will keep the security risk on your computer and will no longer detect it to remove from your computer.
     
     
   • Ignore or Skip: This option tells the scanner to ignore the risk for this scan only. It will be detected again the next time that you run a scan.
     
     
   • Cancel: This option is new to Norton Antivirus 2005. It is used when Norton Antivirus 2005 has determined that it cannot delete a security risk. This Cancel option tells the scanner to ignore the risk for this scan only, and thus, the risk will be detected again the next time that you run a scan.
     
     To actually delete the security risk:
     • Click its file name (under the Filename column).
     • In the Item Information box that displays, write down the full path and file name.
     • Then use Windows Explorer to locate and delete the file.
       
       
   • Delete: This option will attempt to delete the detected files. In some cases, the scanner will not be able to do this.
     • If you see a message, "Delete Failed" (or similar message), manually delete the file.
     • Click the file name of the risk that is under the Filename column.
     • In the Item Information box that displays, write down the full path and file name.
     • Then use Windows Explorer to locate and delete the file.
       
       

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode. Once you have restarted in Safe mode, run the scan again.

After the files are deleted, restart the computer in Normal mode and proceed with the next section.

Warning messages may be displayed when the computer is restarted, since the risk may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

3. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. Read the document: How to make a backup of the Windows registry.

1. Click Start > Run.
2. Type regedit
   
   Then click OK.
   
   Note: If the registry editor fails to open the risk may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.
   
   
3. Navigate to and delete the subkeys:
   
   HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall
   {B9AEF567-6DD3-4B30-BCC6-E88829BEDE98}
   HKEY_LOCAL_MACHINESOFTWARENextSecurity.NETSwitchSniffer
   HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorer
   MenuOrderStart MenuProgramsSwitchSniffer
   HKEY_CURRENT_USERSoftwareSwitchSniffer
   
   
4. Exit the Registry Editor.